This is the flagship of SIMA, the bucket are a number of studies for its continuous improvement, one of the more recent introduction of the curved side for easy loading and processing operators.
Sima mixing buckets are applicable to any type of skid-loader, backhoe, wheel loader, telescopic lift, excavator or tractor (with front loader), all equipped with Danfoss hydraulic motor, Hardox 5 front grille mixing material Hot galvanized with bag breaks, electrode diverter to operate the exhaust nozzle, hydraulic hoses and electrical connection to apply it to the operating machine, exhaust pipe.
Optional:
- Hydraulic opening grill with safety value
- Pneumatic opening grille with safety valve
- Double Hardox 450 Hard Case Base
- Sima System multi-connection system
- Side Drainage Trap
- Pressure accumulator
Mode utilization Bucket
WEARING THE CONCRETE EVERYWHERE
Once applied to the machine, the mixing bucket allows you to carry anywhere concrete.
AVOID THE SEPARATION OF COMPONENTS
The impellers of the mixing bucket continue to rotate during transportation maintaining the mixture in the best condition.
NEED FOR A LOW COST INSTALLATION
The use of the new mixing bucket will only result in a small integrated in the hydraulic system of your car, thus leaving unchanged its payload.
Shortens PERFORMANCE OF CONCRETE
Thanks to the particular mechanism of the grinding wheel, it takes 3 minutes to mix the best elements, even for the mixing buckets larger (1,000 liters in 3 min.).
USE YOUR EQUIPMENT MAINTENANCE QUICK AND EASY
It can be applied to any type of machine, increasing the possibility of use.
DOWNLOAD ALSO SET TO HIGH
Take advantage of the lifting capacity of the machine where the mixing bucket is applied.
Phases Processing Concrete
Phase 1
Charge
The Charge of the inert material is made directly with the mixing bucket attached to the machine working.
In the second stage are then added water and the cement in the proportions necessary to work.
Time of operation: 30 seconds.
Accessories: Grid hydraulic opening.
Phase 2
Mixing
The particular design of the impellers, pushes the mixture towards the center of the bucket.
In this way we obtain concrete of better quality due to this forced mixing (and not through fall from the walls).
Time of the transaction: 2 minutes.
Phase 3
Exhaust
The mixing bucket is equipped with opening in the bottom that allows the drain to the fall of the product in process.
Through the application of a discharge hopper, it is possible to direct the concrete at the desired point.
Time of the transaction: 2 minutes.
Video of the 3 phases of Use
Video of the 3 phases of Use
If you want to see the video in the area not covered by the network, you just download the video and save it on your device to be able to see anywhere.
NB: If you’re on a mobile device, will be required to use apps such as Dropbox to save the file.
Skills of various Models
| MODELLO | S10 | S15 | S20 | S25 | S30 | S35 | S40 | S45 | S50 | S75 | S100 | S150 | S180 | S200 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CAPACITÀ Lt | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 750 | 1000 | 1500 | 1800 | 2000 |
| PESO A VUOTO Kg | 182 | 265 | 280 | 350 | 380 | 400 | 540 | 600 | 700 | 950 | 1000 | 1750 | 1800 | 1900 |
| PESO CALCESTRUZZO * | 240 | 360 | 480 | 600 | 720 | 840 | 960 | 1080 | 1200 | 1800 | 2400 | 3600 | 4320 | 4800 |
| PESO A PIENO CARICO Kg ** | 422 | 625 | 760 | 950 | 1100 | 1240 | 1500 | 1680 | 1900 | 2750 | 3400 | 5350 | 6120 | 6700 |
| TIPO DI TRASMISSIONE | RIDUTTORE | RIDUTTORE | RIDUTTORE | CATENA | CATENA | CATENA | CATENA | CATENA | CATENA | CATENA | CATENA | CATENA+2 MOT | CATENA+2MOT | CATENA+2MOT |
| GIRI CONSIGLIATI | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| RAPPORTO DI TRASMISSIONE | 1/8,4 | 1/8,4 | 1/8,4 | 10/54 | 10/54 | 10/54 | 9/46 | 9/46 | 9/46 | 10/65 | 10/65 | 10/80 | 10/80 | 10/80 |
| PORTATA OLIO Lt Min / Max | 41/75 | 41/75 | 41/75 | 41/75 | 41/75 | 52/90 | 65/90 | 69/150 | 69/150 | 123/240 | 123/240 | 160/250 | 160/250 | 160/250 |
| PRESSIONE CONTINUA Bar | 130 | 130 | 130 | 140 | 140 | 180 | 160 | 160 | 160 | 180 | 160 | 180 | 180 | 160 |
| PRESSIONE PICCO Bar | 180 | 180 | 180 | 180 | 180 | 210 | 190 | 190 | 190 | 200 | 190 | 200 | 200 | 190 |
| APERTURA SCARICO CENTRALE | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA | IDRAULICA |
| DIMENSIONI LaXLuXh | 100x70x65 | 100x85x70 | 125x85x70 | 155x90x75 | 165X90X75 | 170x100x75 | 165x105x100 | 175x105x105 | 195x105x105 | 195x125x120 | 210x130x130 | 215x150x160 | 235x150x160 | 250x150x160 |
(*) SPECIFIC GRAVITY CONCRETE (Cls) 2400KG / Sqm – (**) Low Pressure (recommended) Max (Max Peak).
Circular of the Ministry of Labour and Social Policy (Registrazione.0000028.02-07-2013) you must ensure that the operating machine has an operating load exceeding the permissible maximum mass of the mixing bucket.
Components first choice
All buckets are equipped with engines DANFOSS protection of the jack Commons, exhaust pipe, protection grid, solenoid valve and connections for the machine on which it is applied.
How to order Spare Parts?
Simple, you can fill in the form below by entering all the necessary data, our technician will contact you as soon as possible.
